Walk-In Shower Installation in Roseville, CA

Walk-in shower installation gives you an open, low-entry shower built around how you use it: a glass door or a doorless entry, a bench, niches and room to move. Most walk-in showers in the Roseville area cost about $15,000 to $32,000, depending on the entry, tile and glass, and take 2 to 4 weeks. You get a free in-home visit and a written, itemized quote.

5.0

66 five-star reviews on

Walk-in shower installation with white zellige tile, a walnut-topped bench, green tile niche and terracotta hexagon floor

Walk-In Shower Styles We Build

Mix and match. Many walk-in showers combine two or three of these ideas to fit the room and the way you shower.

Not sure which style fits your bathroom? We’ll help you choose.

I’m Interested!
Doorless frameless glass walk-in shower with a fixed panel on the shower head side, clay zellige back wall and travertine floor

Frameless Glass Walk-In Shower: Door or Doorless?

This is the choice that shapes the rest of the design. Both work well. The right one depends on the length of your shower and how much you want to clean.

We use tempered safety glass for every shower, and we measure it after the tile is done so it fits your opening exactly.

  • With a frameless door

    A door keeps warm air in and water out, even in a smaller shower. It is the safer pick when the shower is short or the toilet sits right next to the entry. See frameless shower doors for styles and glass options.

  • Doorless, with a fixed panel

    An open entry feels larger and there is no door or hinge to clean. It works well in a longer shower, with the shower head at the far end so spray stays inside.

  • What a doorless shower needs

    Enough length for the water to stay in, a floor that slopes the right way, and a bathroom with good airflow. If your space is tight, we will tell you and suggest a door.

How Big Should a Walk-In Shower Be?

Building code sets a minimum size, but comfort starts a bit larger. These are the sizes we plan around most often.

  • Around 36 by 48 inches

    A comfortable size for one person in a smaller bathroom. There is room for a niche and a corner shelf, and a door usually makes sense here.

  • The size of an old tub

    About 60 inches long and 30 to 32 inches deep. It fits a bench at one end or a long niche, and it is the space you get when a tub comes out.

  • 60 inches and longer

    Enough room for a doorless entry, a full-width bench or a rain head plus a handheld. This is a common size in primary bathrooms.

  • Room for two

    A wider shower with two shower heads, each with its own control. It takes more space and plumbing, so we plan it early.

  • Space outside the shower

    Leave clear floor space at the entry to step out and dry off, and room for the door to swing. We check this before we draw anything.

Walk-in shower with a floating sage-green tile bench, a matching niche, brass handheld shower on a slide bar and stone-look walls

Benches, Niches and Fixtures

Small details make a walk-in shower easy to live with. We plan where everything goes before the walls are closed.

If you are starting from a tub, our tub to shower conversion page covers removing it and the resale questions. This page focuses on the shower itself.

  • A walk-in shower with a bench

    Choose a built-in tiled bench, a floating stone seat or a fold-down teak seat. We add solid support in the wall so it stays firm every time you sit.

  • Niches in the right spot

    We place niches on inside walls, not outside ones, so we do not cut into insulation. We size them for tall bottles and keep them out of the main spray.

  • Controls you can reach

    The valve goes near the entry, so you can turn the water on without getting wet. A handheld on a slide bar works for tall and short family members.

Details That Make a Walk-In Shower Last

Good walk-in shower installation comes down to details you will never see. The open design leaves less room for mistakes, so we take care of these on every project.

  • A low threshold

    A low curb makes the shower easy to step into. For no step at all, see our curbless shower page. Either way, the floor must slope so water heads to the drain, not the bathroom.

  • Full waterproofing

    Every wall and the floor in the wet area get a waterproof layer under the tile. This matters even more with an open, doorless design. Choosing between tile and panels? See tile vs. acrylic shower walls.

  • The right drain

    A center drain is classic and affordable. A linear drain lets you use large floor tiles and works well with a low or no-curb entry.

  • Slip-resistant floor tile

    Smaller tiles with more grout lines, or tiles with a textured finish, give better grip when wet. We help you pick one that is also easy to clean.

  • Fan and light

    A strong exhaust fan keeps steam and mold down. A wet-rated light over the shower makes it bright and safe.

  • Already have a shower?

    If your current shower leaks or is worn out, our shower replacement page explains the signs and what a full tear-out includes.

How Much Does Walk-In Shower Installation Cost?

These are typical all-in ranges for the Roseville and Sacramento area, including labor, materials, glass and fixtures. Your exact price comes after a free visit.

What changes the price

  • Shower size and whether walls move

  • Tile, stone and glass choices

  • A bench, niches and extra shower heads

  • Any repairs found during tear-out

0% financing for 12 months. On approved credit. Ask us for details.

  • Walk-in shower in a full bathroom remodel

    New shower plus vanity, floor, lighting and fixtures

    $25,000 – $46,0002 – 6 weeks
  • Walk-in shower in a former tub space

    Tub removal, new drain and valve, prefab or tile, glass

    $15,000 – $32,0002 – 4 weeks
  • Curbless walk-in shower

    Level-entry floor, linear drain, bench, frameless glass

    $25,000 – $32,0002 – 4 weeks

* Ranges are a guide, not a quote. 0% financing for 12 months. On approved credit. Prices last reviewed November 2026.

How It Works

Walk-in shower installation in four steps, from the first sketch to your first shower.

  1. Step 1: Free in-home visit

    We measure the space, check the plumbing and ask how you like to shower.

  2. Step 2: Design and quote

    We lay out the size, glass, bench and niches, and you get a written, itemized price before any work starts.

  3. Step 3: We build it

    Tear-out, plumbing, waterproofing, tile and glass, with permits and cleanup included.

  4. Step 4: Final walkthrough

    We run the water, check the slope and glass, and go over every detail with you.

Ready to start? Step one is free.

I’m Interested!

Join the homeowners who built their new shower with us.

I’m Interested!

Areas We Serve

Based in Roseville, we remodel bathrooms across Placer, Sacramento, El Dorado, Yolo and Nevada counties: 36 communities in all. Don’t see your city? Give us a call. If you’re nearby, we can likely help.

Loading map…

Our home county. From Roseville and Rocklin up through Auburn and the foothills.

Walk-In Shower FAQs

Straight answers about walk-in shower cost, size, glass and timing.

Still have a question?

Talk to a real person on our team. We’re happy to help, even if you’re just starting to plan.

How much does a walk-in shower cost?

Replacing a tub with a walk-in shower costs about $15,000 to $32,000. A shower with no curb costs about $25,000 to $32,000. As part of a full bathroom remodel, expect about $25,000 to $46,000.

How long does walk-in shower installation take?

Most walk-in showers take 2 to 4 weeks. When the shower is part of a full bathroom remodel, plan on 2 to 6 weeks. We give you the schedule before work starts.

Do walk-in showers need a door?

Not always. A doorless shower works when it is long enough and the shower head points away from the opening. In a smaller shower, a frameless door keeps water and warmth inside.

Does a walk-in shower splash water onto the floor?

Not when it is planned well. We size the glass, place the shower head and slope the floor so water stays inside. A door is the simple fix if space is tight.

What is the smallest walk-in shower you recommend?

Building code sets a minimum, but we suggest about 36 by 48 inches for comfort. If your bathroom is small, we can show you layouts that make the most of it.

Can I add a bench to a walk-in shower?

Yes. We build tiled benches, floating stone seats and fold-down seats. Each one gets solid support in the wall so it stays firm.

Are you a walk-in shower contractor near me?

We work in Roseville and the greater Sacramento area, including Rocklin, Lincoln, Granite Bay, Folsom, El Dorado Hills and Sacramento. See all our shower remodel services.

Still have questions? Talk to a real person on our team.

Related Bathroom Services

More ways we can help with your bathroom.

Finished walk-in shower installation with a soft blue zellige wall, fixed glass panel, brass fixtures and travertine floor

Ready for a Walk-In Shower?

Start with a free in-home visit. We’ll measure your space, talk through glass, bench and entry options and give you a written quote. No pressure.

I’m Interested!