Grab Bar Installation in Roseville, CA

Grab bar installation puts sturdy bars where you need support by the shower, tub and toilet, anchored into studs or solid wood blocking. Grab bars plus a comfort-height toilet usually cost $2,000 to $5,000 and take 2 to 3 days. A wider safety retrofit with a handheld shower and non-slip floor runs about $15,000 to $25,000.

5.0

66 five-star reviews on

Grab bar installation in a clay zellige walk-in shower: a vertical brass bar at the entry, a long bar on the back wall and a teak bench

Grab Bar Styles That Match Your Bathroom

Grab bars do not have to look like a hospital. We match them to your faucets and pick the right type for each spot.

Not sure which grab bars you need? We’ll help you choose.

I’m Interested!
Open bathroom wall with solid wood blocking between the studs at grab bar height, next to a new shower valve rough-in

Why the Anchoring Matters Most

A grab bar is only as strong as what holds it to the wall. A bar screwed into drywall alone can pull out the first time you lean on it. That is why we start every job by finding what is behind the wall.

Suction-cup bars from the hardware store are fine for balance, but they are not made to hold your weight.

  • Into the studs

    Where the bar lines up with a stud, we fasten straight into it. We find the studs first, then plan the bar length so both ends land on solid wood.

  • Blocking for grab bars

    If the walls are open during a remodel, we add solid wood blocking between the studs. Then you can put a bar almost anywhere, now or years from now.

  • Tile and fiberglass walls

    When there is no stud where you need a bar, we use heavy-duty anchors made for grab bars. On tile, we drill carefully to avoid cracks, then seal every hole so water stays out.

Where Shower and Tub Grab Bars Go

Good placement follows how you actually move. During the visit, we ask you to walk us through getting in and out, then mark the spots together. These are the places that help most people.

  • At the shower entry

    A short vertical bar right at the opening gives you something to hold as you step in and out. It is the bar most people use every day.

  • Along the back wall of the shower

    A horizontal bar on the long wall helps you stay steady while you wash. ADA guidelines place it 33 to 36 inches above the floor, which suits most adults.

  • Next to the seat

    If you sit to shower, a bar beside the seat helps you sit down and stand up. It sits near the controls and the handheld shower, so everything is in one spot.

  • In a tub

    ADA guidelines use two bars on the back wall: one 33 to 36 inches above the floor and one lower, just above the tub rim. A vertical bar at the faucet end helps you step over the tub wall.

  • In a curbless shower

    With no edge to step over, the bars are mainly for balance and for the seat. If you are planning a curbless shower, we add blocking in the walls before the tile goes up.

Bathroom where safety bars blend in: a brass grab bar by the toilet and a matching brass bar in a sage zellige shower

Bathroom Safety Bars That Look Good

Bathroom safety bars should be easy to find and easy to grip, and they should still look like they belong. We pick them with the same care as your faucets.

Grab bars are often the first step in an accessible bathroom remodel, and they work in any style of bathroom.

  • Matching finishes

    Brushed brass, matte black, chrome and nickel bars are easy to find. We match the finish to your faucet and shower head so the bars look planned.

  • Grip and size

    A round bar that fits your hand is easier to hold when wet. Textured grips help even more in the shower.

  • Length that fits the wall

    We size each bar so it reaches the studs and the spot you grab. A bar that is too short can end up just out of reach.

Toilet Grab Bars and ADA-Style Heights

Handicap grab bars in public restrooms follow ADA guidelines. Your home does not have to, but the same measurements are a good place to start. We adjust them to your height and how you move.

  • Beside the toilet

    ADA guidelines call for a side bar at least 42 inches long, 33 to 36 inches above the floor. It helps you lower yourself down and push back up.

  • Behind the toilet

    A rear bar at least 36 inches long, at the same height, gives a second point of support. If the tank is in the way, we plan around it or use a fold-up bar to the side.

  • Bar size and wall gap

    ADA guidelines use a bar 1 1/4 to 2 inches across, with a 1 1/2-inch gap to the wall. That leaves room for your hand without letting your arm slip through.

  • Strength

    ADA guidelines call for grab bars that hold 250 pounds of force. That is why we anchor into studs or blocking, not just drywall.

  • Pair it with a comfort-height toilet

    A taller toilet and a grab bar together make sitting and standing much easier. That pairing is one of the most useful bathroom safety upgrades for seniors.

How Much Does Grab Bar Installation Cost?

These are typical all-in ranges for Roseville and the greater Sacramento area, including labor, materials and fixtures. Your exact price comes after a free visit.

What changes the price

  • How many bars you need and where they go

  • Tile, stone or fiberglass walls versus drywall

  • Whether walls are opened to add blocking

  • The finish and style of the bars you choose

0% financing for 12 months. On approved credit. Ask us for details.

  • Grab bars + comfort-height toilet

    Grab bars by the shower or tub and toilet, plus a new comfort-height toilet

    $2,000 – $5,0002 – 3 days
  • Full safety retrofit

    Grab bars, handheld shower, non-slip floor, comfort-height toilet

    $15,000 – $25,0002 days – 1 week

* Ranges are a guide, not a quote. 0% financing for 12 months. On approved credit. Prices last reviewed November 2026.

How It Works

Four simple steps, and the placement is planned with you.

  1. Step 1: Free in-home visit

    We watch how you move in the bathroom, find the studs and mark where each bar should go.

  2. Step 2: Clear quote

    You get a written, itemized price for each bar and any other upgrades before any work starts.

  3. Step 3: We install them

    We anchor every bar into studs, blocking or rated anchors and seal every hole in tile.

  4. Step 4: Final walkthrough

    We test each bar with you and adjust anything that does not feel right before we call it done.

Ready to start? Step one is free.

I’m Interested!

Join the homeowners who trusted us with their home.

I’m Interested!

Areas We Serve

Based in Roseville, we remodel bathrooms across Placer, Sacramento, El Dorado, Yolo and Nevada counties: 36 communities in all. Don’t see your city? Give us a call. If you’re nearby, we can likely help.

Loading map…

Our home county. From Roseville and Rocklin up through Auburn and the foothills.

Grab Bar FAQs

Straight answers about placement, anchoring, cost and grab bars in tile.

Still have a question?

Talk to a real person on our team. We’re happy to help, even if you’re just starting to plan.

How much does grab bar installation cost?

Grab bars plus a comfort-height toilet usually cost $2,000 to $5,000 and take 2 to 3 days. A full safety retrofit with a handheld shower and non-slip floor runs about $15,000 to $25,000. Your exact price depends on how many bars you need and the walls they go on.

Can you install grab bars in a tiled shower?

Yes. We drill through the tile carefully, fasten into studs or blocking where we can, and use heavy-duty grab bar anchors where we cannot. Every hole is sealed so water stays out of the wall.

What height should a grab bar be?

ADA guidelines place most grab bars 33 to 36 inches above the floor. In a tub, a second bar goes just above the rim. At home, we adjust the height to suit you.

What is blocking for grab bars?

Blocking is solid wood added between the wall studs. It gives a strong base for a grab bar wherever you want one. The easiest time to add it is during a remodel, while the walls are open.

Are suction-cup grab bars safe?

They can help with balance, but they are not made to hold your full weight and can let go. For real support, a bar needs to be anchored into the wall.

Can I use a towel bar as a grab bar?

Not a standard one. Regular towel bars are not made to hold your weight. We can install grab bars that double as a towel bar, so you get both.

Can you add grab bars by a walk-in tub?

Yes. We place bars by the door and seat so getting in and sitting down feels steady. See our walk-in tub installation page for more on those tubs.

Still have questions? Talk to a real person on our team.

Related Bathroom Services

More ways we can help with your bathroom.

Finished grab bar installation in a glacier blue zellige shower with a brass bar, handheld shower and teak fold-down seat

Ready for Support Where You Need It?

Start with a free in-home visit. We’ll find the studs, plan the placement with you and give you a written quote. No pressure.

I’m Interested!