Shower Replacement & Installation in Roseville, CA

Shower replacement means tearing out a worn, leaking or dated shower and building a new one with fresh waterproofing. Most shower replacements in the Roseville area cost about $15,000 to $27,000 and take 2 to 4 weeks. Prefab panels sit at the lower end and custom tile with glass sits higher. You get a free in-home visit and a written, itemized quote.

5.0

66 five-star reviews on

Shower replacement with white vertical tile, a cobalt-blue niche and penny tile floor, glass door and matte black fixtures

New Shower Options

Your new shower can match the old layout or improve on it. These are the three paths most homeowners choose.

Not sure which option fits? We’ll help you choose.

I’m Interested!
Old shower before replacement, with small beige tile, stained grout, a cracked tile, chrome valve and a dated framed glass door

Repair or Replace Your Shower?

Not every tired shower needs to come out. Some problems are on the surface. Others mean water has been getting behind the tile for a while.

We look first, and we tell you which one you have. If a repair will do, we say so.

  • When a repair is enough

    Grout that is only stained, a worn caulk line or a dripping handle can often be fixed without a tear-out. If the tile is solid and the floor feels firm, a repair may buy you years.

  • When it is time to replace

    Loose tile, a soft or cracked floor, or signs of water outside the shower usually mean the waterproofing has failed. Patching the surface will not fix what is behind it.

  • How we check

    We tap the tile, look at the grout and caulk, check the floor around the shower and look for stains below or behind it. You get a straight answer and a written quote.

Signs Your Shower Needs Replacing

If you notice one or two of these, it is a good time to have someone look. The sooner a leak is found, the smaller the repair around it.

  • Loose, hollow or cracked tile

    Tile that moves or sounds hollow when tapped has often lost its bond because water got behind it.

  • Grout that keeps crumbling

    Grout that cracks or washes out soon after it is redone points to movement or moisture underneath.

  • A soft spot or crack in the floor

    A shower floor or base that flexes, cracks or holds puddles may have a failed pan below it.

  • Stains, peeling paint or a musty smell

    Water marks on the ceiling below, swollen baseboards next to the shower or a smell that will not go away are signs of a slow leak.

  • Mold that comes back

    Mold you clean every week and that always returns often lives in the grout or wall behind it.

  • An old valve or a dated look

    An old valve that drips or will not hold a steady temperature, or a shower that simply feels dated, is a fine reason to replace a shower too.

Shower made with large stone-look solid-surface wall panels and no grout lines, a white base, brass fixtures and linen curtain

Prefab Panels vs. Tile

Both make a good new shower. The difference is look, price and how long the build takes. We bring samples of both to your visit.

If your old shower is a tub with a shower head, you can also take the tub out. Our tub to shower conversion page explains that project and its cost.

  • Prefab and solid-surface panels

    Large panels and a factory-made base go in faster and cost less. There are few seams, so cleaning is easy. They suit hall baths, rentals and tighter budgets. See tile vs. acrylic shower walls for a full comparison.

  • Custom tile

    Tile gives you any size, color and pattern, plus niches and benches built right into the walls. It takes more labor and time, which is why it costs more.

  • Glass and fixtures for either

    Both options can have frameless or framed glass, a handheld shower and a new valve. We help you pick finishes that match the rest of your bathroom.

Waterproofing: The Part You Never See

Tile and grout are not waterproof on their own. A new shower lasts because of the layers behind it. This is what goes into every shower we build.

  • Tear-out to the studs

    We remove the old tile, backer and pan so we can see the framing. Any rot or old water damage is fixed before we build back.

  • Water-resistant backer board

    Cement board or foam board goes on the walls instead of drywall. It holds tile well and does not break down when wet.

  • A full waterproof membrane

    A sheet or liquid membrane covers every wall and the floor in the wet area, with the seams and corners sealed.

  • A sloped, tested pan

    The shower floor slopes to the drain so water never sits. We fill the pan with water and check it for leaks before any tile goes on.

  • A new valve while the wall is open

    Swapping the valve now costs far less than opening a new wall later. A pressure-balance or thermostatic valve keeps the temperature steady.

  • Fan and airflow

    A working exhaust fan pulls moisture out after every shower, which helps the grout and caulk last.

How Much Does Shower Replacement Cost?

These are typical all-in ranges for the Roseville and Sacramento area, including tear-out, waterproofing, materials and fixtures. Your exact price comes after a free visit.

What changes the price

  • Prefab panels versus custom tile

  • Shower size and any layout changes

  • Glass type and fixture finishes

  • Water damage found behind the old shower

0% financing for 12 months. On approved credit. Ask us for details.

  • Standard shower replacement

    Old shower out, new waterproofing, valve, prefab panels or tile, glass

    $15,000 – $27,0002 – 4 weeks
  • Tub-to-shower conversion

    Tub removed, new walk-in shower in the same space

    $15,000 – $32,0002 – 4 weeks

* Ranges are a guide, not a quote. 0% financing for 12 months. On approved credit. Prices last reviewed November 2026.

How a Shower Replacement Works

Four steps, and we handle the mess.

  1. Step 1: Free in-home visit

    We inspect your current shower, check for signs of leaks and measure the space.

  2. Step 2: Clear quote

    You get a written, itemized price and choose panels or tile, glass and fixtures before any work starts.

  3. Step 3: Tear-out and rebuild

    We remove the old shower, fix any damage, waterproof, test the pan and build the new shower, with permits and cleanup included.

  4. Step 4: Final walkthrough

    We run the water, check every seam and the glass, and go over care tips with you.

Ready to start? Step one is free.

I’m Interested!

Join the homeowners who replaced their shower with us.

I’m Interested!

Areas We Serve

Based in Roseville, we remodel bathrooms across Placer, Sacramento, El Dorado, Yolo and Nevada counties: 36 communities in all. Don’t see your city? Give us a call. If you’re nearby, we can likely help.

Loading map…

Our home county. From Roseville and Rocklin up through Auburn and the foothills.

Shower Replacement FAQs

Straight answers about cost, timing and what happens when you replace a shower.

Still have a question?

Talk to a real person on our team. We’re happy to help, even if you’re just starting to plan.

How much does shower replacement cost?

Most shower replacements cost about $15,000 to $27,000. A prefab panel shower sits at the lower end. Custom tile with frameless glass, or repairs found behind the old shower, push it higher.

How long does it take to replace a shower?

Most take 2 to 4 weeks. The schedule includes tear-out, any repairs, waterproofing, a leak test, tile or panels and glass. We do not rush the waterproofing, because it is what keeps the shower dry for years.

Why does a shower replacement take weeks, not days?

A proper replacement includes tearing out to the studs, fixing any damage, waterproofing and a leak test, and several steps need time to set. Covering an old shower with a liner is faster, but it can hide a leak instead of fixing it.

Can you replace just the shower and leave the rest of the bathroom?

Yes. Many shower installation jobs touch only the shower and the wall or floor right next to it. If the vanity, floor and lighting are also worn out, we can talk about a full bathroom remodel instead.

My shower leaked. Do I need to replace it?

Often, yes, if the leak comes from the pan or the walls. A leak from the valve or a drain line can sometimes be repaired. We find the source first and tell you which it is.

Can I make my new shower bigger?

Usually. While the old shower is out, we can move a wall, lower the entry or add a bench. Our walk-in shower page shows layouts and sizes.

Do you work outside Roseville?

Yes. We replace showers in Roseville and the greater Sacramento area, including Rocklin, Lincoln, Granite Bay, Folsom, El Dorado Hills and Sacramento. See all our shower remodel services.

Still have questions? Talk to a real person on our team.

Related Bathroom Services

More ways we can help with your bathroom.

Finished shower replacement with a clay zellige wall, niche, fixed glass panel and brass rain and handheld showers

Ready to Replace Your Shower?

Start with a free in-home visit. We’ll inspect, measure and give you a written quote. No pressure.

I’m Interested!